Thanks for visiting Woodturning Tools. Please remember to bookmark this page Slot Cutter. If you found what your looking for, then don"t forget to click an appreciation button above for this post.
 63/64" Cutting Dia Straight Shank T Slot Milling Cutter US $17.36 
|
 4mm Two Flute Parallel Shank Slot Drill Milling Cutter US $3.73
|
 15/64" Depth 8 Flutes Straight Shank T Slot Cutter Tool US $17.49
|
 16mm Dia Double Flute Parallel Shank Slot Drill Cutter US $9.36
|
 47/64" x 3/16" HSS AL 8 Flutes T Slot Milling Cutter End Mill US $12.06
|
 7 PIECE T-SLOT CUTTER SET NEW 4/23/12 US $133.95
|
 Straight Shank 8 Flutes 47/64" x 3/16" HSS AL T Slot Cutter US $11.92
|
 PUTNAM 9/16" T-SLOT CUTTER 159958 US $36.00
|
 KEO 1-1/2 Inch T-Slot Milling Cutter #71120 US $350.00
|
 63/64" x 15/64" HSS AL 8 Flutes T Slot Cutter End Mill US $17.62
|
 47/64" x 3/16" 8 Flutes Straight Shank T Slot Cutter Tool US $11.72
|
 Niagara TM352 F82 T-Slot Cutter Roughing End Mill US $16.30
|
 T-Slot Cutter .750" x .030" Radius Carbide US $29.60
|
 25/32" x 3/25" HSS AL 6 Flutes T Slot Cutter End Mill US $12.12
|
 25/32" x 3/25" Straight Shank T Slot Milling Cutter New US $11.33
|
 POHL T-SLOT CUTTER 1-1/2" x 1-1/4" HSHD HSS US $25.00
|
 SLOT CUTTER 5-1/2" x 2-1/4" HSS 8 Teeth [RB2] US $70.00
|
 5" x 1/2" x 1 1/4" STAGGERED TOOTH SIDE- Slot Milling Cutter HSS 22 tooth US $75.00
|
 5" x 1/2" Rad. x 1 1/4" CONVEX SIDE Slot Milling Cutter HSS 14 Tooth MORSE USA US $85.00
|
 keo keyseat cutter,woodriff key t-slot US $9.99
|
 National Twist Drill 4 x 3/4 x 1-1/4 Slot Cutter US $34.95
|
 National Twist Drill 4 x 1/4 x 1-1/4 Slot Cutter US $27.95
|
 National Twist Drill & Tool 6 x 1 x 1-1/4 Slot Cutter US $37.95
|
 M4 x 0.70 metric iscar milling cutter torx T15 screws lot of 10 new slot cnc US $8.50
|
 New 1PC 40MM-8 HSS T-Slot cutter shank End mill cutter US $19.90
|
 (#2487C) New Machinist 1/2 inch Roughing T-Slot Milling Cutter US $29.99
|
 (#2486C) Used Machinist 1-1/2 inch T-Slot Milling Cutter US $29.99
|
 FLY CUTTER R8 SHANK 5/16" SLOT NEW TOOLING US $9.95
|
 Niagara Cutter T-Slot Milling Cutter Saw Blade .750" x .210" x 4.250" US $69.00
|
 DORIAN TOOL INDEXABLE T-SLOT CUTTER 3/4" SHANK 31/32" CUT SLOT-097-CE06-075-NEW US $64.99
|
 Cobalt Roughing T-Slot Cutter 1-15/32 Dia 3/4" Bolt 5/8" W 6FL US $129.00
|
 Cobalt Roughing T-Slot Cutter 1/2" Bolt 31/32" Dia 25/64" Cut Width 5FL US $67.76
|
 Cobalt Roughing T-Slot Cutter 5/8" Bolt 1-1/4" Dia 31/64" Cut Width 6FL US $120.00
|
 T-Slot Cutter -KEO-70340, 3/4" US $169.00
|
 T-Slot Cutter 1.000" Diameter x .500" x .125" (Regrind) US $14.95
|
 1-3/4" KEYWAY Milling Cutter Horizontal Mill machine 4" diameter slot tool US $21.50
|
 Valenite VMM-50-4-1020LA 10" Mill Face Slot Cutter VAL-U-MILL tool tooling US $79.00
|
 Valenite GTE 10" Face Mill Slot Cutter VMM-50-41020-RA tool tooling wo/carbide US $89.00
|
 HSS saw slot cutter 3 1/4 x 0.156 x 1 used Illinois tool USA milling bridgeport US $12.00
|
 APT SM2410R-2 1-3/4" x 1" RH T-SLOT CUTTER US $182.99
|
 YOUNGQUIST .352 CARBIDE FORM T-SLOT CUTTER (AA1904-1) US $25.00
|
 Vintage Woodruff Keyway Slot Cutter Milling Fixture Portable US $100.00
|
 25/32" x 5/32" HSS AL 6 Flutes T Slot Cutter End Mill US $11.52
|
 25/32" Cutting Dia Straight Shank T Slot Milling Cutter US $11.35
|
 3/25" Depth Straight Shank 6 Flutes T Slot Cutter Tool US $11.48
|
 LIFETIME CARBIDE 7 PC C3 TIPPED 1/4" SHANK SLOT CUTTERS US $14.99
|
 Ingersoll Slot Milling Cutter 39J6S-06050AH-01 US $450.00
|
 Milling Cutters, T-Slot (6) NEW!! X-096 US $79.99
|
 NIAGARA T-SLOT Milling Cutter 1-15/32" 5/8" 10930 (Z45) US $125.00
|
 Greenleaf 5-1/8 x .685 x 1.5 Slot Cutter Carbide Tips US $49.95
|
 INGERSOLL INDEXABLE SLOTTING MILL CUTTER - 8" DIA x 1.5" Shank Hole DIA 12 Slot US $25.00
|
 Seco Slot Milling Cutter 335 18 125 1418 US $350.00
|
 1" Mill Arbor Slot Cutter Spacer 0.26" Long 2-3/4" Diameter US $5.95
|
 6MM CARBIDE SLOT DRILL END MILL CUTTER 3 FLUTE *NEW* US $20.23
|
 Dorian Indexable T-Slot Cutter NEW!!! (B*12) US $59.95
|
 5/32" Depth 6 Flutes Straight Shank T Slot Cutter Tool US $11.42
|
 Greenleaf 5 x .760 x 1.5 Slot Cutter Carbide Tips US $47.95
|
 Greenleaf 5-1/8 x .635 x 1.5 Slot Cutter Carbide Tips US $47.95
|
 7 PIECE T-SLOT CUTTER SET NEW US $119.95
|
 10 PC. LOT- INGERSOLL MAX-I-PEX INDEXABLE SLOT MILL CUTTERS- 4 STYLES US $339.99
|
 LOT of 4!! new Slot Cutter Router Bit Carbide 1/16" End Mill Saw Slotting US $39.99
|
 LOT of 4!!new SLOT Cutter Router Bit Carbide 7/64" End Mill Saw Blade SLX764 US $38.99
|
 5/32" 1/4" 1/8" 3/32" new Slot Cutter Router Bit Carbide End Mill Saw Slotting US $39.99
|
 T-Slot Cutter 4.000" Diameter x 4.362" OAL x .125" Shank Diameter (Regrind) US $89.00
|
 HSS slot saw cutter 2 3/4 0.093 3/32 x 1 ID bridgeport machine shop used nice US $12.50
|
 Interstate 1-1/4" Slot Cutter 3-Insert NEW (BN98) US $89.95
|
 Union Twist Drill HSS 8 x 3/16 x 1-1/4 Slot Cutter US $47.95
|
 New RRT Carbide Tipped T-Slot Cutter 3/4" Bolt Retail $220 US $89.25
|
 18mm Dia Double Flute Parallel Shank Slot Drill Cutter US $10.48
|
 A07 2481, 11/16" 15.85 sh Roebuck HSS Slot MILL CUTTER US $9.78
|
 A07 2462, 27 x45mm 20sh Deep r. CS Slot Mill CUTTER new US $14.16
|
Slot Cutter
Where did the electric razor come from?
Razors have been around for a very long time, although electric razors didn't come into existence until the 1930's. Since then, they have greatly evolved and are now a staple in many people's beauty repertoires.
Although there were early experiments with clockwork and friction motor, electric razors didn't appear until the 1930's. The electric razor was a actually invented by Canadian Jacob Schick in the 1920's. He thought for sure that a man's age could be extended to 120 years if he properly shaved.
Schick had already invented a system where a person could insert new blades into a razor without having to touch them, so an electric razor was the next step. He did come up with a monstrous device that was much to big to market, but it had to be further developed to make it easier to handle. He waited until an electric motor that was small enough to fit into a hand-held device, but also powerful enough to cut through a beard, was developed.
He sold his first electric razor in 1931 for $25 in New York. In the same year he managed to sell a whopping 3,000 more. This version contained an oscillating induction motor that drove a sliding cutter in a slotted shearing head. The motor had to actually be 'kick-started' using an exposed turn wheel. All of these components were housed in a sleek, black, Bakelite device that could easily be held comfortably in one hand.
Schick's electric razor caught on, and by 1937 1.5 million were in use with its market worth $20 million.
Of course competitors came out of the woodwork, and so did many patent infringements and lawsuits. One such competitor was Gillette, a name that is well-known today.
The Remington 'Close Shaver' and the Sunbeam 'Shavemaster' were also launched in 1937. The latter used a brush motor with a foil shearing head, which was certainly different than Schick's motor and slotted cutter.
Two years later the Philips "Philishave' launched in the Netherlands, using another technology of a rotating blade behind a circular shearing head.
At the time the cutting area of these electric razors was quite small. In fact, they typically covered an area only a quarter of the size by those of modern electric razors.
Electric razor technology soon launched in Britain in the mid 1930's. Their names, such as 'Viceroy' and 'Zenith', suggested they were the most up to date gadget that could be found. However, it wasn't until American servicemen arrived in Britain that the electric razor actually caught on.
The electric razor also gained popularity when Hollywood became involved. Seen in such films as The Long Wait and Rear Window, the electric razor was definitely seen as a gadget for the modern man.
Throughout the years the electric razor greatly evolved. For example, models for women were designed. This was something that wasn't seen until the late 1940's.
These days dry shaving isn't necessarily the only option. Some can now be used in conjunction with shaving cream, w while others can be used in the shower.
Cordless, battery-operated models are also available.
About the Author
Learn about white clematis and sweet autumn clematis at the Clematis Care site.
If you are looking for a different item here are a list of related products on Woodturning Tools, please check out the following:
