Thanks for visiting Woodturning Tools. Please remember to bookmark this page Roughing Endmill. If you found what your looking for, then don"t forget to click an appreciation button above for this post.
 NEW HANITA HSS PM60 ROUGHING END MILL 1.1/2x1.1/4xR0.5 US $89.90 
|
 NEW HANITA HSSCo ROUGHING END MILL 1.1/2x1.1/4x3" US $59.90
|
 1/2" x 1/2" 4 FLUTE ROUGHING END MILL ~NEW~ M-42 US $15.99
|
 Onyx 2" x 2" x 4" x 7-3/4" 3F Cobalt M42 TiN RH Roughing End Mill US $370.10
|
 STRASMANN ROUGHING4 FLUTE END MILL 3/8" * US $8.99
|
 4 FLUTE END MILL M42 ROUGHING 3/4X3/4X1-5/8X3-3/4" * US $44.99
|
 SPI ROUGHING CUTTER END MILL 7/8X3/4X1-7/8 85-512-2 * US $35.99
|
 1-1/2X3/4 M42 Round Tooth Roughing Single End Mill US $140.07
|
 1-3/4X1-1/4 Round Tooth Roughing Single End Mill US $142.11
|
 New 3 Flute M42 8% Cobalt Roughing Single End Mill US $136.70
|
 ROUGHING END MILL Coarse Pitch 3/8" 3FL Cobalt (Z22) US $25.00
|
 NIAGARA Roughing End Mill 1-1/4" 3FL Fine 44733 [163] US $68.00
|
 15/64" 6mm Dia Straight Shank HSS AL 4 Flutes Cutting Roughing End Mill US $8.79
|
 NIAGARA Roughing End Mill 1-1/2" 6FL 5-1/2" 75726 [163] US $135.00
|
 HSS AL 4 Flute Roughing Milling Cutter End Mill 35/64" 14mm Cutting Diameter US $9.71
|
 Niagara Cutter Roughing End Mill TS111 31/32" NEW (RB51 US $50.00
|
 1" Cobalt 5 Flute Roughing End Mill US $54.99
|
 HANITA Cobalt Roughing End Mill 5/8" 4FL Fine TiCN 5/8" x 2-1/2" x 4-5/8" [390] US $65.00
|
 Niagara TM352 F82 T-Slot Cutter Roughing End Mill US $16.30
|
 2" x 2" x 1-1/4" Fine Tooth Roughing Center Cutting End Mill 8 Flute US $106.25
|
 HSS AL 4 Flutes Milling Cutter Roughing End Mill 25/64" 10mm Cutting Dia US $7.15
|
 3/8" Roughing Endmill 3 flute US $24.00
|
 3/8" Kennametal Carbide 3 Flute KC625 TICN Roughing Rougher End Mill (Lot#360) US $26.99
|
 BRUBAKER --STARCHIP -USA-6 FLT. 1 1/4" END MILL - ROUGHING & FINISHING, END MILL US $78.00
|
 1-1/4x1-1/4 M-42 Roughing End Mill 6 Fluets NEW US $95.00
|
 15/32" 12mm Dia Straight Shank 4 Flute HSS AL Roughing End Mill Cutting Tool US $9.09
|
 Accupro 93262426 Roughing End Mill US $69.99
|
 NEW HANITA HSS PM60 ROUGHING END MILL 2" x 2" x 4" x 7.3/4 R0.5 US $149.00
|
 NEW HANITA HSS PM60 ROUGHING END MILL 2" x 2 x 6 x 9.3/4 R0.5" US $169.00
|
 5/8 carbide endmills ,1/2 ,3/8, 5/16, carbide endmills roughing endmills 26pcs. US $120.00
|
 Acculead 2 Inch 6 fluted Ball Type Roughing End Mill US $190.00
|
 5pc 5/8" Roughing End Mills Cobalt 4 Flute REM HSCO 261SO US $99.99
|
 LOT of 3/4" End Mills CONTROX VX 4 Flute Roughing Finishing HSS Cobalt 225SO US $89.99
|
 USA 1/2" Roughing End Mills Cobalt 4FL Roughers 2-1/2" 343SO US $49.99
|
 1-1/4" 1.25" Roughing End Mills Cobalt 6FL Roughers TiN Coated 345SO US $149.99
|
 Greenfield Industries Tin 6 Flute 2"x2"x3" Fine Pitch Roughing End Mills US $180.00
|
 SPI 85-506-4 - 1/2 4 FLUTE HSS/CO ROUGHING ENDMILL UN-COATED US $23.00
|
 14 1" Roughing End Mill Hanita, OSG, Niagara Course, fine, Ball M42 cobalt Mills US $255.00
|
 SPI 85-507-2 - 5/8" 4 FLUTE HSS/CO ROUGHING ENDMILL UN-COATED US $24.00
|
 Interstate 3/4x3/4x1-5/8x3-7/8 Roughing End Mill Single End SQ 4FL M42 TiN/COB US $29.92
|
 SPI 85-515-5 - 1" 5 FLUTE HSS/CO ROUGHING ENDMILL UN-COATED 2"LOC US $40.00
|
 5/16" Roughing Finishing End Mill Cobalt 4FL 3/4" LOC NEW (451) US $19.95
|
 16mm 5/8" Dia Straight Shank 4 Flute HSS AL Roughing End Mill Cutting Tool US $13.90
|
 HANITA 1/2" Cobalt Roughing End Mill NEW (P61) US $25.00
|
 HANITA 1/4" Cobalt Roughing End Mill NEW (P61) US $25.00
|
 ENDMILLS REAMERS TAPS ROUGHING END MILLS ASSORTMENT US $9.99
|
 2 PCS HERTEL 1" X 1" M42 FINE PITCH ROUGHING-ROUGHER ENDMILL US $68.00
|
 1-1/4 X 1-1/4 X 3 X 5-1/2 M42 ROUGHING END MILL (E-2-6-1) US $65.00
|
 (#2471C) Used American Made Long 1 Inch Single End Roughing Style End Mill US $15.99
|
 Hanita 2X2X4X7.3/4 Roughing Single End Mill US $199.99
|
 HANITA 2" Cobalt Roughing End Mill NEW (P61) US $100.00
|
 NEW Multiple Flute Coarse Tooth Centercutting Roughing End Mills Mill 1/4" ALTin US $35.00
|
 PUTNAM Roughing End Mill 1" 5FL Cobalt Coarse TiN 1" x 3" x 5-1/2" 97021 [568] US $50.00
|
 PUTNAM Roughing End Mill 3/4" 4FL Cobalt Fine 3/4" x 4" x 6-1/4" 97715 [568] US $65.00
|
 PROMAX Carbide Roughing End Mill 9/16" 4FL (Z18) US $60.00
|
 PUTNAM Roughing End Mill 1" 5FL Cobalt Fine 3/4" x 2" x 4-1/4" 97295 [567] US $65.00
|
 PUTNAM Roughing End Mill 1/4" 4FL Cobalt Coarse 3/8" x 1-1/4" x 3-1/8" [567] US $28.00
|
 PUTNAM Roughing End Mill 3/8" 4FL Cobalt Coarse 3/8" x 1-1/2" x 3-1/4" [568] US $35.00
|
 HERTEL Roughing End Mill 1/2" 4FL Cobalt Coarse 1/2" x 1/2" x 2-1/2" [568] US $35.00
|
 New Niagara Ticn Coated Cobalt 5 Flute Roughing Endmill US $85.00
|
 New Strasmann Tin Coated 5 Flute Roughing Endmill US $70.00
|
 New Strasmann Tin Coated 6 Flute Roughing Endmill US $70.00
|
 Carbide Roughing End Mill 1" 6FL 45deg TiAlN 1" x 1-11/16" x 4-5/8" [461] US $150.00
|
 6pc 1" Roughing Center-Cutting 5-Flute End Mill US $93.99
|
 RBC 1-1/4" M42 Lead: 7.707 Rough Roughing End Mill US $21.99
|
 HANITA Roughing End Mill 5/8" 4FL Coarse Cobalt TiCN 5/8" x 1-5/8" x 3-3/4 [461] US $50.00
|
 3/4" X 1"LOC 4 FL PROMAX CARBIDE ROUGHER ROUGHING END MILL ALTIN COATED .030R US $79.99
|
 2 NIAGARA / OSG 1" COBALT 5-FLUTE ROUGHING ENDMILLS US $.99
|
 FIVE 3/4" COBALT ROUGHING ENDMILLS US $.99
|
 STRASMANN 1-1/2" COBALT 3-FLUTE ROUGHING ENDMILL US $.99
|
 HANITA 6207 M-42 Lead 1-3/4 x 1-1/4x4 -1/2 Roughing End Mill NEW US $109.99
|
 2 HANITA / YG 1" COBALT 5-FLUTE ROUGHING ENDMILLS US $1.75
|
 NEW (HANITA) CARBIDE ROUGHING END MILL 12x12x27x83 US $39.90
|
 NEW HANITA HSCo ROUGHING END MILL 2.1/2x2.1/2x10x13.3/4 US $169.00
|
 HANITA 12mm 4 FLUTE SOLID CARBIDE ROUGHING COATED ENDMILL (#306) US $49.90
|
 NEW Weldon 3" Crest Cut Roughing Endmill, 7-1/4" O.A.L. US $250.00
|
 SPI 85-452-1 - 3/8" 3 FLUTE STUB LGTH HSS/CO ROUGHING ENDMILL UN-COATED US $16.00
|
 MINICUT Roughing End Mill 1-1/4" 6FL Cobalt [YB90] US $55.00
|
 HANITA Roughing End Mill 1-1/2" 6FL Cobalt TiCN Coarse 1-1/4" x 2" x 4" [RB23] US $150.00
|
 End Mill Lot HSS Roughing Cleveland Machinist Tool CNC Hobby 4 Flute US $13.00
|
 PROMAX Roughing Finishing Carbide End Mill 5/16" 4FL AlTiN 3/4" x 2-1/2" [236] US $32.00
|
 WELDON Roughing End Mill 1-1/2" 2FL 5-1/2" 57122 [P39] US $45.00
|
 HANITA Roughing End Mill 2" 3FL Cobalt 6-3/4" [YB89] US $100.00
|
 5 PCS. 1 1/4" SHANK END MILLS HSS FINISH ROUGHING 6 FLUTE MACHINIST TOOLS US $49.99
|
 roughing NIAGARA ENDMILL 1" DIAMETER 3/4 SHANK 5 FLu RH TICN 3 3/4 LONG END MILL US $24.95
|
 1/4" carbide endmill for aluminum roughing US $24.75
|
 FASTCUT 1-1/2" ROUGHING ENDMILL M 42 COBALT US $24.00
|
 1/4" 3 FLUTE STUB LENGTH FINE PITCH TiCN HSCO ROUGHING END MILL US $24.31
|
Roughing Endmill
Tool Masters
In modern life everybody try to be master over any damage to their machinery. They first check it by themselves and sometimes it falls on the right place and the vehicle really becomes all right. But before doing any experiment over your vehicle or any machinery at your home or at your work you first need those instruments which are used and most important in this process.
Milling cutters, Broaches, gear shaper cutters which are categorize in different parts and are used in different problems. If you are a professional mechanic then you know its importance but if you are a common person then these are helpful for you also. These are portable and easy to use.
At the tool masters, all types of tools are available there. There sub-parts are also available. All types of milling cutters like side and double angle cutters, side and face cutters, cylindrical cutters, convex cutters, concave cutters etc. milling parts are used in different machinery at home and outside home. Milling cutters are used in grinder, washing machine etc. and other home appliances and in sophisticated machinery also. So quality matters a lot as their life increases with their quality.
Another important part of metal working process is broaches. Broaches are available in both standard and special. They have different types like round, hexagonal, rectangular etc. and heavily useful. Although its other options are also available but because of its multipurpose use it is still popular. But obviously money matters, so broaches are available in different ranges also. But we recommend for the quality as it really work.
Gear Shaper cutters is available in three different types like disk type shaper cutters, shank type shaper cutters, hub type etc. New inventions are happening in this field to make these tools in the reach of common man. Mitsubishi Heavy Industries (MHI) is planning to begin its full-scale marketing. Gear shaper tools areused for roughing and finishing so not feasible to use for an unknown person as its skilled business.
Other important and useful tools are also available in the market. But we again recommend for the same suggestion that Go for the quality product.
About the Author
There sub-parts are also available. All types of milling cutters like side and double angle cutters, side and face cutters, cylindrical cutters, convex cutters, concave cutters etc. milling parts are used in different machinery at home and outside home.
If you are looking for a different item here are a list of related products on Woodturning Tools, please check out the following:
