Thanks for visiting Woodturning Tools. Please remember to bookmark this page Die Head. If you found what your looking for, then don"t forget to click an appreciation button above for this post.
 GEOMETRIC 1" NPT CHASERS FOR 1SR DIE HEAD US $20.00 
|
 3/4" DSA Geometric Die Head with 1" shank US $2,270.00
|
 4.4 LB LOT OF DIE HEAD THREADER CHASERS US $61.99
|
 Landis Heat Treated Die Heads Operator’s Handbook US $20.00
|
 Import Self Opening Die Head 1" x 9/16" SDG-2,R$800 US $398.00
|
 1/4-20 CHASER FOR GEOM DIE HEAD 3/4" D SERIES US $30.00
|
 GEOMETRIC 9/16" DS DIE HEAD, 3/4" ALIGNING SHANK US $600.00
|
 GEOMETRIC 3/4" SHANK FOR 9/16" DSA DIE HEAD, 1 1/4" SHA US $80.00
|
 SLIGHTLY USED 5/16 GEOMETRIC DSA DIE HEAD US $650.00
|
 Geometric Die Head DSA 9/16" US $500.00
|
 chaser geometric die head chasers 1 1/2 NPS 2 1/4 BJ US $22.00
|
 DIE HEAD - #1 IN LOT US $500.00
|
 DIE HEAD - #2 IN LOT US $500.00
|
 DIE HEAD - #3 IN LOT US $500.00
|
 DIE HEAD - #4 IN LOT US $500.00
|
 DIE HEAD - #5 IN LOT US $500.00
|
 3/8-16 PROJ CHASER FOR GEOMETRIC DIE HEAD 3/4" US $30.00
|
 7/16-14 PROJECTION CHASER FOR GEOM DIE HEAD 3/4" US $30.00
|
 7/16-20 CHASER FOR GEOM DIE HEAD 3/4" D SERIES US $30.00
|
 1/2-13 LH CHASER FOR GEOM DIE HEAD 3/4" D SERIES US $30.00
|
 1/2-13 LH CHASER FOR GEOM DIE HEAD 3/4" D SERIES US $30.00
|
 1/2-13 LH CHASER FOR GEOM DIE HEAD 3/4" D SERIES US $30.00
|
 1/2 NPT CHASER FOR GEOM DIE HEAD 3/4" D SERIES US $30.00
|
 LANDIS 18 TPI 5/16" DIE HEAD THREAD CHASERS screw machine threading tool US $60.00
|
 GEOMETRIC 5/16 DSA DIE HEAD REPAIR PARTS LOT *NEW* THREADING US $169.99
|
 GEOMETRIC 9/16 DSA DIE HEAD REPAIR PARTS LOT *NEW* THREADING US $199.99
|
 GEOMETRIC 3/4 DSA DIE HEAD REPAIR PARTS LOT *NEW* THREADING US $199.99
|
 Jones & Lamson Die Head Thread Chasers cutting tools1/2" and 3/4" holder US $9.99
|
 2 sets Jones & Lamson Die Head Thread Chasers cutting tools 2" holder 1-3/4-12 US $9.99
|
 SCHWABE TWIN A, DOUBLE HEAD DIE CUTTER CLICKER US $3,100.00
|
 GEOMETRIC 3/4" SOLID SHANK FOR 5/16" DSA DIE HEAD US $80.00
|
 GEOMETRIC #6-32 CHASERS FOR 5/16" KD DIE HEAD US $20.00
|
 AC 220V 120W 10mm x 60mm Mould Die Single Head Cartridge Heater US $6.01
|
 MACHINIST MILL LATHE TOOL Brookfield USA DB10 Tap Wrench Chuck Die Head 5/8 Sh US $9.99
|
 chaser geometric die head chasers 15/16 18 1 DS thread US $22.00
|
 Jones Lamson 1929 #4 Hartness Die Head Proposal US $50.00
|
 RIDGID Power Threading Die Head 2" Machine #97075 US $495.94
|
 Landis Die Heads Chaser Pipes Threading Machines Instruction Manual US $23.00
|
 GEOMETRIC #5-44 NEW MILLED CHASERS, FOR 5/16" D, DS, DSA DIE HEAD, 45 CHAMFER US $20.00
|
 GEOMETRIC 1 13/16"-40 MILLED PROJECTED CHASERS, FOR 1 3/4" DS DIE HEAD US $20.00
|
 GEOMETRIC 1 17/32"-32 MILLED PROJECTED CHASERS, FOR 1 3/4" D, DS DIE HEAD US $20.00
|
 GEOMETRIC #2-56 SUPERMETRIC CHASERS, FOR 5/16" D, DS, DSA DIE HEAD, 45 CHAMFER US $20.00
|
 GEOMETRIC 1 11/16"-32 MILLED CHASERS, FOR 1 3/4" DS DIE HEAD, LEAD THREADS GROUN US $15.00
|
 GEOMETRIC 1 9/16"-48 MILLED CHASERS, FOR 1 3/4" DS DIE HEAD US $20.00
|
 GEOMETRIC 1 1/4"-32 SUPERMETRIC CHASERS FOR 1 3/4" DS DIE HEAD US $25.00
|
 DIE HEAD - #6 IN LOT US $500.00
|
 DIE HEAD - #7 IN LOT US $500.00
|
 DIE HEAD - #8 IN LOT US $500.00
|
 DIE HEAD - #9 IN LOT US $200.00
|
 JONES & LAMSON 16-S AUTOMATIC OPENING DIE HEAD 3/4" SH US $350.00
|
 Geometric 3/4" DT Die Head for Multi Spindle Or,1" SK W/1/4" NPTF Chasers US $250.00
|
 GEOMETRIC #08246 #5 TRIP LEVER FOR 9/16" DSA DIE HEAD US $20.00
|
 GEOMETRIC #08309 #16 TRIP LEVER FOR 9/16" DS DIE HEAD US $10.00
|
 GEOMETRIC #8314 #16 TRIP LEVER FOR 9/16" DSA DIE HEAD US $10.00
|
 Geometric 1 1/2" DDS Die Head W/4sets of chasers US $750.00
|
 Geometric die head with dies US $11.00
|
 chaser geometric die head chasers 7/8 30 1 DS new set US $22.00
|
 Jones & Lamson Die Head 21S US $395.00
|
 Die Head #00 X-254 US $89.99
|
 Geometric 1" DS Stationary Self-Opening Die Head US $700.00
|
 J&L chasers dies die head threading Thread 11/16"-11 US $16.50
|
 J&L chasers dies die head threading Thread 15/16"-9 tpi US $16.50
|
 5/16" -24 GEOMETRIC ? Thread chasers 1-1/4C Die Head US $14.50
|
 H&G DIE THREADING HEAD US $149.99
|
 GEOMETRIC #07638 LOCKING BOLT, FOR 9/16" DS DIE HEAD US $8.00
|
 Threading Die Head, 3/4 Model F-Made in USA US $135.00
|
 Ridgid 37625 No. OO-RB Manual Pipe Threader Die Head, NPT 7/16" 14 TPI US $34.99
|
 FETTE THREAD ROLLING HEAD THREADING LATHE + USED DIES US $1,116.79
|
 GEOMETRIC DIE HEAD 9/16 INCH DS ALIGNING US $289.99
|
 Counterbore Lot for Socket Head Cap Screws Spotface Machinist Tool Die US $11.39
|
 Ridgid 37625 NPT 7/16" 14 TPI Manual Pipe Threader Die Head, No. OO-RB US $29.99
|
 GEOMETRIC 1 9/16"-48 MILLED PROJECTED CHASERS, FOR 1 3/4" DS DIE HEAD US $20.00
|
 GEOMETRIC 1 1/4" SHANK FOR 1" D DIE HEAD US $50.00
|
 1-1/4" SHANK 3/4" GEOMETRIC THREAD CUTTING DIE HEAD W/CHASERS US $625.00
|
 FDHS-3T DIE SHANK for FLOATING DIE HEAD US $65.00
|
 FETTE F1/F2 DIE HEAD PARTS(SEE DESCRIPTION FOR PARTS) US $225.00
|
 Geometric 5/16 D Die Head W/5/8" Sk & New 2/56 projection Chasers US $325.00
|
 food extruder die head pneumatic valves US $420.00
|
 Geometric 1-3/4" die head 1-1/2" D. shank US $300.00
|
 Cleveland Twist Drill Vers-O-Tool Die Head DS1 5/8 US $500.00
|
 Jones & Lamson Tangent Die Head w/ accessories - FF5 US $499.98
|
 VERS-O-TOOL DIE HEAD DR1 IN GOOD CONDITION US $175.00
|
 TELEDYNE,LANDIS,LANDMATIC,CARRIER BLOCKS LANDIS DIE HEAD + CHASERS US $149.00
|
 Landis Landmatic Die Head 5HH1887, 5/8 Stationary 1" Straight Shank Chasers US $299.00
|
 GEOMETRIC 1 1/2"-12 CHASERS FOR 1"S DIE HEAD US $20.00
|
 GEOMETRIC 1 5/8"-12 CHASERS FOR 1 1/4" S DIE HEAD US $20.00
|
 GEOMETRIC 1 11/16"-20 CHASERS FOR 1 1/4"S DIE HEAD US $20.00
|
 GEOMETRIC 2"-12 GROUND CHASERS FOR 1 1/2"S DIE HEAD US $20.00
|
Die Head
The Cold Heading Process for Small Metal Parts
Their function seems so simple, but small metal parts play a huge role in keeping certain industries afloat. For example, where would the electronics industry be without the screws, contact rivets, and miniature components that are used to build products? And where would the automotive industry be without the bevy of metal fasteners used to keep cars in one piece? Imagine trying to drive a car held together by rubber bands and duct tape. That's a world without simple metal parts. Despite the relative importance of these parts, however, few people know how and where they are made. Even the executives of the companies which keep the metal part industry in business are often far removed from the manufacturing decisions and industrial knowledge.
The truth is that there are many metalworking processes—die casting, extrusion, forging, and so on. Each of these processes falls into one of the following categories—forming, cutting, and joining—and has its own strengths and weaknesses when it comes to industry. One in particular is extremely useful for manufacturing small metal parts. This is the cold heading process.
Cold heading is a process which shapes metal by applying force to a metal blank with a punch and die. Once the force applied by the die exceeds the metal blank's yield strength, the material begins to give and take on the shape of the die. Why is this process so effective? For starters, it allows a supplier to make extremely precise parts given the use of a die. Many different shapes and designs can be realized, and furthermore it is easy to create custom shapes for individual clients. Second of all, the cold forming process strengthens the metal through deformation. This makes cold headed parts far more durable and resistant to shock and fatigue than small metal parts created through a different process. Thirdly, there is no scrap produced since the metal is shaped rather than cut or otherwise removed. This means that production can occur more quickly and efficiently, without the extra labor that is required to remove the scrap. The bottom line is that the cold heading process is able to produce small metal parts quickly and cheaply when compared to others means.
While the cold heading process is fantastic for small metal fasteners such as screws, contacts, contact rivets, and other fasteners, it is not ideal for everything. Larger projects may be served better by another type of metalworking. Furthermore, cold heading companies can only use certain types of materials with their stamping machines. Metals such as steel, aluminum, copper, and nickel work well with cold heading machines. As do precious metals such as silver, gold, and platinum. Iron, however, is an exception. As are magnesium, refractory metals, titanium, and zinc.
Given the widespread use of cold forming processes, it is important for executives in many industries to understand the process through which their components and products are manufactured. Knowing whether to look for a cold heading company or another type of industrial supplier will help businesses save time and expense, as well as create a better end-product. You can follow these links for more information:
http://bigelowcomponents.com
http://www.stalcop.com/cold-heading.php
About the Author
The author has experience in industrial supply and manufacturing.
If you are looking for a different item here are a list of related products on Woodturning Tools, please check out the following:
