Thanks for visiting Woodturning Tools. Please remember to bookmark this page Cutter Tool. If you found what your looking for, then don"t forget to click an appreciation button above for this post.
 1/2" SHANK FLY TOOL CUTTER 3 PIECE SET NEW 02/09/12 US $10.50 
|
 7" Round Lathe Handle Mill Milling machine surface tool cutter od grinder parts US $38.50
|
 USED VALENITE "SPECIAL" BORING TOOL CUTTER (5-1/2" DIAMETER) TL#059-05-233-00 US $89.45
|
 TWO !!! Amana Tool 1"-1-3/4" Shaper Cutter T Bushings # BU-564 US $16.99
|
 OTC6504 ISO BUBBLE FLARING TOOL SET W/CUTTER US $76.38
|
 OTC 6503 Deluxe Double Flaring Tool Set with Cutter US $63.50
|
 Ammco 2109 Tool Bit Package Cutter US $12.00
|
 FIVE FISCH TENON PLUG CUTTERS TOOL BITS DRILL 3/8" 1/2" 5/8" 3/4" 1" SHANK 1/2" US $47.57
|
 .375 .250 *QTY 50* endmill Carbide New Router bit tool saw Solid Cutter 3/8x 1/4 US $109.99
|
 CINCINNATI-MILACRON "MONOSET" TOOL & CUTTER GRINDER US $12,500.00
|
 NEW HSS END MILL 1/4" x 3/8" tool milling cutter U.K. US $12.00
|
 NEW HSS END MILL 5/16" x 3/8" tool milling cutter US $9.99
|
 NEW HSS END MILL 3/8" x 3/8 tool milling cutter ADDISON US $9.99
|
 1/2" CARBIDE tipped Chucking Reamer Ream Mill reaming Cutter Tool 3/8" tip .375" US $11.50
|
 1/2" Plus size REAMER mill machine Cutter CARBIDE Tip Ream Reaming tool .503" US $17.85
|
 MACHINIST MILL LATHE TOOL LARGE End Mill Holder Chuck Spindle With Angle Cutter US $9.99
|
 MACHINIST MILL LATHE TOOL Lot of 11 Mill Slitting Saw Cutter s 5/8" Bore US $13.50
|
 MACHINIST MILL LATHE TOOL Lot of 4 Fowler Mill Slitting Saw Cutter s US $9.99
|
 MACHINIST MILL LATHE TOOL Lot of 2 New Mill Slitting Saw Cutter s US $9.99
|
 MACHINIST MILL LATHE TOOL Lot of 4 New Mill Slitting Saw Cutter s US $15.50
|
 MACHINIST TOOLS LATHE MILL LOT OF Lathe Cutting Cutters Tools Bits US $39.65
|
 1-3/4" FLY CUTTER w/ 5/8" SHANK & CARBIDE TIPPED TOOL BITS US $6.02
|
 LOT OF (4) 6" USED SHELL MILLING CUTTERS & 2" ARBOR TOOL HOLDER - NIAGARA US $139.99
|
 LOT OF 5 BORING BARS RODS CUTTING CUTTERS LATHE TOOLS 1/2" 9/16" 3/8" WIDE SHANK US $9.95
|
 Lathe Mill Tool Holding Holder Fly Cutter Use 3/8 or 1/4 Thick Insert US $19.99
|
 Lathe Mill Tool Holding Holder Fly Cutter Use 1/4 Thick Insert US $19.99
|
 USED SIDE MILLING CUTTER SLITTING SAW 4 X 1/8 X 1 HSS MACHINIST TOOL US $2.47
|
 USED MILLING CUTTER SLITTING SAW 3 X 3/32 X 1 HS MALCO MACHINIST TOOL US $3.25
|
 3-1/4" FLY CUTTER w/ 3/4" SHANK & CARBIDE TIPPED TOOL BITS US $3.20
|
 Antique & Vintage Lot of Pipe Cutter Threaders 4 Tools Total US $55.00
|
 USED MILLING CUTTER 2.820 X .185 X 1 CARBIDE TIPPED MACHINIST TOOL US $3.01
|
 USED MILLING SLAB CUTTER 1-1/2 X 1/2" BORE HS BTC MACHINIST TOOL US $.99
|
 25/32" Cutting Depth 4 Flutes End Mills Cutter Milling Tool US $4.78
|
 Straight Shank 1 9/16" Cutting Depth End Mills Cutter Milling Tool US $7.10
|
 25/32" Cutting Depth End Mills Cutter Machine Cutting Tool US $4.78
|
 3/25" Depth Straight Shank 6 Flutes T Slot Cutter Tool US $11.34
|
 5/64" x 15/64" 4 Flutes End Mills Cutter Machine Milling Tool US $4.29
|
 1/16" x 1/4" Straight Shank End Mills Cutter Cutting Tool US $4.57
|
 USED MILLING SLAB CUTTER 2" X 3/4" BORE EXCELLENT CONDITION MACHINIST TOOL US $.99
|
 Straight Shank 4 Flutes End Mills Milling Cutter Tool 5/32" x 15/64" US $7.96
|
 Shank 9/16" Cutting Dia Milling Cutter End Mill Tool US $11.84
|
 Wood Working 1/2" Shank 2" Milling Cutter End Mill Tool US $7.97
|
 PROFILATOR 446-32 FLY CUTTER LATHE CNC BRIDGPORT MACHINE SHOP TOOL HOLDER 3/4" US $19.99
|
 Mschinist tools Milling Cutter HSS 4F 8 * 8mm 8mm US $3.50
|
 Mschinist tools Milling Cutter HSS 4F 9 * 10mm 9mm US $3.90
|
 Mschinist tools Milling Cutter HSS 4F 10.0*10mm 10mm US $3.95
|
 Adjustable Circle Cutter Carving Tool for Carpentry US $12.32
|
 Mschinist tools Milling Cutter HSS 4F 11*12mm 11mm US $4.85
|
 Mschinist tools Milling Cutter HSS 4F 12*12mm 12mm US $5.10
|
 Mschinist tools Milling Cutter HSS 4F 13*12mm 13mm US $5.10
|
 Mschinist tools Milling Cutter HSS 4F 14*12mm 14mm US $6.90
|
 Mschinist tools Milling Cutter HSS 4F 15*16mm 15mm US $7.85
|
 Mschinist tools Milling Cutter HSS 4F 16*16mm 16mm US $8.10
|
 SG Tool Aid 18000 3/8" Rotary Spot Weld Cutter US $26.93
|
 Sraight Shank 1/2" x 1/2" End Mills Milling Cutter Tool US $9.64
|
 5/8" Cutting Dia 4 Flutes End Mills Cutter Cutting Milling Tool US $10.29
|
 45/64" x 5/8" Straight Shank End Mills Cutter Milling Tool US $11.62
|
 15/64" x 15/64" Straight Shank HSS End Mill Cutter Milling Tool US $4.28
|
 Straight Shank HSS-AL End Mills Cutter Tool 5/32" x 15/64" US $4.25
|
 25/64" x 25/64" 4 Flutes End Mills Cutter Milling Cutting Tool US $5.80
|
 Double Flutes 5/128" Cutting Dia End Mills Cutter Milling Tool US $4.65
|
 Cutting Tool Black HSS Saw Blade Mill Cutter 72 Teeth 40mm Dia US $4.79
|
 Mschinist tools Milling Cutter HSS 4F 17*16mm 17mm US $10.50
|
 1/2" X 3/4" Open End Carving Cutter Router Bit Tool US $5.87
|
 15/64" x 15/64" 4 Flutes End Mill Cutter Milling Cutting Tool US $3.52
|
 Mschinist tools Milling Cutter HSS 4F 18*18mm 18mm US $12.50
|
 100 Cup Diamond Grinding Wheel Grit 150 Tool Cutter Grinder US $42.99
|
 100 Cup Diamond Grinding Wheel Grit 400 Tool Cutter Grinder US $42.99
|
 100 Cup Diamond Grinding Wheel Grit 600 Tool Cutter Grinder US $42.99
|
 100 Cup Diamond Grinding Wheel Grit 80 Tool Cutter Grinder US $42.99
|
 Mschinist tools Milling Cutter HSS 4F 20*20mm 20mm US $16.50
|
 Mschinist tools Milling Cutter HSS 4F 22*22mm 22mm US $18.50
|
 .4385" Ultra Tool Series 453 Reamer. Solid Carbide Cutter Section. Shank Not US $55.00
|
 Mschinist tools Milling Cutter HSS 4F 8.5*8mm 8.5mm US $6.10
|
 15/64" Dia HSS Straight Shank 2 Flute End Mill Cutter Tool US $4.20
|
 5/32" x 15/64" Straight Shank 4 Flutes HSS-AL End Mills Milling Cutter Tool US $4.63
|
 Wood Open End Carving Bit Cutting Cutter Tool 1/2" x 1" US $6.59
|
 Woodworking 2-1/2" Shank 1/2" Straight Cutter End Tool US $8.90
|
 Straight Shank 1/2" x 1/2" HSS-AL End Mills Cutter Tool US $7.90
|
 1/4" X 1" Open End Carving Cutter Router Bit Set Tool US $5.78
|
 15/64" Depth 8 Flutes Straight Shank T Slot Cutter Tool US $17.49
|
 Wood Working 1" Depth Milling Cutter End Mill Tool New US $5.14
|
 5/8 PLUG & DOWEL Cutter Drill bit Fisch Austria hollow round rod woodwork tool US $23.00
|
 Grinding Disc Cut-off Cutter Blades Abrasives Cutting Wheel Tool 30 Pcs US $10.01
|
 Straight Shank 2 Flutes 5/16" Dia End Mills Milling Cutter Tool US $8.31
|
 Milling Cutter Tools 0.16" Diameter Spring Collet Chuck US $16.90
|
 15/64" Cutting Dia 6mm 15/64" Straight Shank End Mill Cutter Tool US $7.30
|
 Cincinnati Wheelmount for #2 Tool & Cutter Grinder US $75.00
|
Cutter Tool
Plasma Cutters Can Cut Though Anything!
One of the best tools for cutting metal is a plasma cutter. It is effective and convenient to use, and thanks to the latest technology being applied in the area, it is now possible to cut metal with almost laser precision.
A plasma cutter works differently than a conventional welding torch. Rather than using a flame produced from a burning gas in the style of oxy acetylene welding, a plasma cutter uses a jet of inert gas such as compressed air, and then applies a very high voltage charge. The electric charge arcs through the jet of air, and ionizes the gas. The ionized gas reaches extremely high temperature, and becomes what is called plasma.
This highly charged and hot temperature jet of plasma is able to melt through metal at the point of contact without having a massive impact on the surrounding material. This makes a plasma cutter a very precise way of cutting metal.
For small jobs in a workshop where metal is being cut in order to make a bodywork patch, or a replacement panel, plasma cutters are the ideal solution. One of the most important aspects of plasma cutters is that they use an inert gas, meaning that you do not have to worry about storing volatile and explosive gases.
In the past, plasma cutters were a fairly imprecise and blunt means of cutting metal thanks to their large "flame", however, thanks to advances in the materials and technology used to manufacture plasma cutters, they are now able to produce a much more focused flame. This means that you not only get a more exact and neater cut, but are able to do it with lower power.
Plasma cutters are available from under $1000. You can get a Firepower 12 amp plasma cutter with its own compressor that uses compressed air to create the plasma torch for $998.75. This tool, which is ideal for small jobs in any work shop, is flexible enough to carry out a range of tasks.
With a basic compressor driven plasma cutter, you get a torch with two settings. The pilot arc of plasma is ideal for burning off paint, while when you turn up the power; the cutter is able to cut through sheets of steel an eighth of an inch thick at a rate of around nine inches per minute.
By spending a little more, it is possible to get a more powerful and flexible tool. For less than $1350, you can buy a Lincoln Electric Welders Century 25 Amp Plasma Cutter. This tool is designed for effective auto body repair jobs, and provides a fully earthed cutting arc that removes the high frequency harmonics that are able to damage the complex electronics in a car.
The century 25 amp plasma cutter has its own built in compressor, which has an adjustable regulator to control the size of the actual plasma. This means that you can vary the intensity of the cutting edge of the tool, and deal with metals of different thicknesses up to 3/16" of milled steel, at an acceptable cutting rate.
At the top end of the plasma cutter market there are complex and powerful tools such as the Miller Auto Arc 4500 Plasma Cutter. This tool, which retails from around $2500, is a much more flexible and powerful cutter than most other models. Its 27 amp power supply, coupled with a strong compressor means that it can deliver a flame hot enough to cut through steel more than half an inch thick at an acceptable rate, and get through most body panel metal like a hot knife through butter.
As with all tools, it is important to select the one that fits in best with your business needs and budget. If you only require a lightweight plasma cutter for occasional jobs in the workshop, then an entry level model is perfectly acceptable, however, if you need to perform regular work requiring the tool, then getting a more robust model is an excellent idea, as the tool will more than pay for itself over time thanks to its reliability and ability to cut through metal much faster and let you get on with work more quickly.
About the Author
Jason has been in the construction equipment and industrial sales business for over 10 years. He owns and operates Red Hill Supply to better serve the automotive and industrial industries. -
Air Compressors
If you are looking for a different item here are a list of related products on Woodturning Tools, please check out the following:
