 Mastercool 58531 Valve Core Kit US $93.04 
|
 LXVC Valve Core Tool 1/4" SAE Refrigeration HVAC TOOLS US $32.95
|
 Dual Valve Core Remover/Installer 1/4+5/16"Heavy Duty AC/HVAC Service Port Tool US $24.99
|
 2 VALVE CORE TOOLS LXVC Valve Core Tool 1/4" SAE & LXVC4 with Port Rethreader US $39.95
|
 D1430 Dual Valve Core Tool 1/4" & 5/16" SAE Replace Cores without Losing Charge US $24.95
|
 QTY1 CBI LXVC4 Valve Core Tool with Port Rethreader for HVAC 1/4" SAE Fittings US $8.75
|
 LXVC1 Valve Core Tool Remover Installer for Replacing Valves Cores HVAC Tool US $8.25
|
 LXVC Valve Core Tool 1/4" SAE for Removing Cores from HVAC Access Valves US $24.50
|
 2 VALVE CORE TOOLS LXVC1 Valve Core Tool & LXVC4 with Port Rethreader US $16.95
|
 CPS Pro-Set 1/2" Hose Gaskets w/Valve Core Depressors 6 US $4.95
|
 YORK 022-02475-700 V PORT VALVE CORE US $2.99
|
 1/4" m. flare with valve core x 1/4" m. flare x 1/4" f. flare US $6.60
|
 Brass Flare Adapter 1/4FMF x 1/4MF w/Cap & Valve Core US $6.51
|
 2 VALVE CORE TOOLS LXVC1 Valve Core Tool LXVC4 w/Port Rethreader HVAC/r Tools US $16.95
|
 CPS Pro-Set 1/4"-Replacement Valve Core Depressors @10 US $4.95
|
 LXVC7 Valve Core Tool Removing Installing Schrader Cores HVAC/r Hand Tool US $36.95
|
 Valve Core Removal Tool US $20.50
|
 R134a, Valve Core, Remover Tool, CPS Part# TLVC134 US $52.53
|
 lot:10 Schroeder Schrader DIll Port Valve Core Replacement All Refrigerant HVAC US $8.97
|
 Valve Core Remover/Installer for Tires or HVAC units US $4.99
|
 D1430 Dual Valve Core Tool 1/4" and 5/16" SAE R410A Mini Split AC Systems US $39.95
|
 1 NEW PARKER PS4011660P PH CORE PNEUMATIC VALVE NIB US $19.99
|
 Half Unions w/Valve Core & Cap 1/8MPT x 1/4MF *5 Pack US $8.94
|
 Heavy Duty Valve Core Remover Installer Replacer HVAC + US $39.77
|
 LOT OF 1 JB A31851 1/4" FE SAE SWIVEL W/CORE DEPRESSOR ON RUN ACCESS VALVE US $13.95
|
 LXVC7 Valve Core Tool AC TOOLS Remove and Install Core for 1/4" SAE Fittings US $36.95
|
 MegaFlow Vacuum-Rated Valve Core Removal Tool H26-921 US $89.99
|
 MegaFlow Vacuum-Rated Valve Core Removal Tool H27-056 US $89.99
|
 1/4" O.D. or 3/16" I.D. Valve w/1/4" MF & Valve Core US $1.97
|
 YELLOW-JACKET 1/8" Replacement Valve Cores Screw In US $11.79
|
 6 VALVE CORES CD4450 COMPATABLE WITH ALL REFRIGERANTS US $4.50
|
 R134a, Hose, FJC, Charging Hose, Ball Valve w/Valve Core Depressor x 24" Hose US $22.67
|
 Schroede Valve Core Replacement All Refrigerant HVAC 10 US $5.77
|
 10 Valve Core Replacement all Refrigerants HVAC FreeSHP US $6.99
|
 R134a, Hose, FJC, Charging Hose, Ball Valve w/Valve Core Depressor x 36" Hose US $26.67
|
 C&D CD5050 Thumbscrew Valve Core Depressor US $15.99
|
 FJC PRODUCTS Valve Core Tool LARGE FJC# 2744 US $5.53
|
 JB INDUSTRIES A31999 1/4" VALVE CORES-REFRIGERATION 77836 US $3.00
|
 1/8" O.D. x 1/16" I.D. Valve w/1/4" MF & Valve Core US $1.95
|
 Flex Hose 1/4" FMF w/Valve core depressor x 1/4 male US $9.32
|
 Brass Valve Core Tool SET OF 3 US $2.95
|
 R134a, Retrofit Kit, ALL VEHICLES, Domestic & Foreign, R12 to R134, Valve Cores US $10.95
|
 Schader Valve Core Replacements All Refrigerants HVAC US $5.77
|
 CBI D1430 Dual Valve Core Tool Fits both 1/4" and 5/16" SAE Fittings US $39.95
|
 LXVC7 Valve Core Tool Remover Installer HVAC AC TOOLS US $36.95
|
 MOEN NO. 446 CORE ASSEMBLY VALVE STEM US $55.00
|
 1/4" SAE DualTEE Connector w/Cap & Valve Core x 1/8 MPT US $2.95
|
 Pneumatic Control AC 110V 0.35" Core Solenoid Valve Coil US $6.36
|
 HOSE 7" YELLOW 1/4" SAE w/Valve Core Depressor US $9.93
|
 FULL BOX OF 1000 QTY. TIRE VALVE CORE AIR 100-GSW US $44.95
|
 Unused Henry Valve Co. # 810-CF Filter Core Assy with filter kit, 7 pcs total US $110.00
|
 Mastercool R-134A Valve Core Remover and Installer US $79.67
|
 JB Valve Core Installation Tool with Spare Valve Cores US $32.29
|
 Freeze 12 to R12 Adapter, Includes Cap & Valve Core US $5.73
|
 JB Industries, Valve Core Tool Replacement Tips US $5.95
|
 LXVC1 Valve Core Tool Remover Installer for Replacing Bad HVAC Schrader valves US $8.95
|
 Appion MGAVCR MegaFlow 5/16" Valve Core Removal Tool US $54.99
|
 VALVE CORE REMOVER w/ 3 valve cores US $6.48
|
 HOSE 7" Yellow FREEZE 12 w/Valve Core Depressor US $8.95
|
 C&D Valve CD3930 Ball-Valve Core Removal Tool US $36.95
|
 Dual Valve Core Remover/Installer Heavy Duty HVAC Tool US $39.97
|
 Superior Valve LiquidLine CD55 Char-Core For CFA Shells US $21.21
|
 Fuel Rail Valve Cores 061810020 Oil and gasoline resistant (Lot of 2) US $12.00
|
 LXVC7 Valve Core Tool Removing Installing Schrader Cores Service Tech Hand Tool US $36.95
|
 D1430 Dual Valve Core Tool 1/4" and 5/16" SAE Remove and Install Schrader cores US $39.95
|
 Superior Valve A45 Suction Line Acid Removal Core US $25.46
|
 Valve Cores for Refrigeration Fittings QTY:10 HVAC Tool US $7.95
|
 CPS Dual Valve Core Tool Standard & Large Bore w/CORES US $8.95
|
 Valve Cores, Valve Stems, Good For "ALL REFRIGERANTS", *5 pack US $2.95
|
 3/16" O.D. x 1/8" I.D. Valve w/1/4" MF & Valve Core US $1.96
|
 Mastercool R-12/R134a Valve Core Repair Kit US $62.36
|
 Schroeder Valve Core Replacements All Refrigerant HVAC US $5.77
|
 C&D Valve CD4460 Teflon Valve Cores for 1/4" Male Flare (25 pack) US $15.95
|
 C&D Valve CD4460 Teflon Valve Cores for 1/4" Male Flare (5 pack) US $7.95
|
 C&D Valve CD3813 Core Container / Wrench ( with 3 cores ) US $4.95
|
 90376 Valve Core Remover Installer w/ Cores Air Conditioning Refrigeration US $7.50
|
Valve Core
valve core tool
Calibration process for the mobile spring of a solenoid valve
Process for calibration of the mobile core spring of a solenoid valve comprising an electromagnet subassembly associated with a pneumatic switching subassembly with a valve plug, the valve plug being moved in the body of the pneumatic switching subassembly firstly by a spring located in the mobile core of the electromagnet subassembly through a pusher.
Secondly by a spring located under the valve plug and bearing around the lower seating of the pneumatic switching subassembly, this process comprising the following steps: a force sensor is put into position, either at a predetermined distance from the upper face of the mobile core, this distance being equivalent to the actual travel distance of the mobile core, or directly in contact with the face of the core when it is required to adjust the spring based on its force after the travel distance (core in contact on the yoke); the spring is installed in a reaming providing for this purpose in the axis of the mobile core: an elastic split pin is put into position behind the said spring, that is forced more or less into the reaming of the mobile core while measuring the force generated by the spring on the sensor, and the split pin is no longer forced into the core as soon as the required force is measured by the sensor.
The present invention in general relates to improvements made to solenoid valves. It is more particularly applicable to solenoid valves comprising an electromagnet subassembly associated with a pneumatic switching subassembly with a valve plug, the pneumatic switching subassembly being composed of a body enclosing the valve plug trapped between two sealing seatings facing each other. The valve plug movement is provoked firstly by a spring located in the mobile core of the electromagnet subassembly by means of a pusher, and secondly by means of a spring located under the valve plug (usually called valve plug underspring) and bearing around the lower seating of the pneumatic switching subassembly, this valve plug underspring forcing the said valve plug into contact with the upper seating of the pneumatic switching subassembly when the solenoid valve is energized. In the rest position, in other words when the solenoid valve is not energised, the spring of the mobile core of the electromagnet subassembly pushes the core into contact on the pusher and forces the valve plug onto the seating of the lower channel of the solenoid valve.
The most frequently used solution to solve this problem at the moment is to sort the springs in order to reduce the manufacturing tolerance. This technique is a simple means of reducing manufacturing dispersions, but it still leaves relatively large variations and it increases the cost of the spring production due to manufacturing scrap.
Another solution used at the moment is to adjust the mobile core spring after the solenoid valve has been assembled. Consequently, the yoke, in other words the fixed core of the electromagnet subassembly, is perforated and drilled in the axial direction so that a threaded pusher can be fitted into it on which an O-ring is fitted to make it leak tight. This threaded pusher is in contact at one of its ends with the spring of the mobile core of the electromagnet subassembly.
In order to adjust the solenoid valve, in other words the spring force on the mobile core, all that is necessary is to apply the maximum usage pressure in the lower channel of the solenoid valve and then screw the pusher in until the spring of the mobile core seals the lower seating under the pressure. This known solution is precise because the mobile core spring only applies the force necessary to create a seal on the lower seating of the valve plug of the solenoid valve. The disadvantage of this solution is its manufacturing and installation costs: it requires tapping to be formed in the fixed yoke of the solenoid valve, machining of an additional part (threaded pusher) and the installation of an additional O-ring to seal the assembly.
Consequently, this invention relates to a process for calibration of the mobile core spring of a solenoid valve comprising an electromagnet subassembly associated with a pneumatic switching subassembly with a valve plug, the valve plug being moved in the body of the pneumatic switching subassembly firstly by a spring located in the mobile core of the electromagnet subassembly through a pusher, and secondly by a spring located under the valve plug and bearing on the lower seating of the pneumatic switching subassembly.
The process according to the invention may be applied to a normally open type solenoid valve. According to this particular application, the spring of the mobile core of the electromagnet subassembly is adjusted by using the sensor to measure the force generated by the valve plug underspring when it is assembled in the pneumatic switching subassembly and this force is reproduced in the mobile core spring so that the tolerances of the two springs are compensated by the setting of the mobile core spring.
About the Author
Ningbo Lida Pneumatic Complete Sets Co.,Ltd. specializing pneumatic components,solenoid valve,air cylinder & pneumatic fittings that these are inexpensive.It has with more than 15years.
Here are a list of other products on Woodturning Tools, come check these out:
