You discovered our blog Woodturning Tools. Please Remember to bookmark this page Hvac Compressor. If you enjoy our post Hvac Compressor, show your love by hitting one of the social media buttons above for this page.
Hvac Compressor
HVAC Ohming Compressor Windings
The Pro HVAC Module
Smart-HDL
Introduce
The Pro HVAC Module
ALL your Air condition connection and control Problems now it solved with Smart-HDL, the New Pro HVAC Module and the intelligent DLP LCD Panel introduce you wide range of control
1 - Don’t be confused, you can connect single Compressor Stage, Multi Compressor Stages both in 1 Module.
2 - Safety Running time: adjustable Running Sequences for Single and Multi Stage to safe your Compressor.
3 - Safety ON/OFF Protection: ON compressor, FAN safety adjustable delay time
4 - All Modes, Adjustable Cooling Heating, Auxiliary control.
5 - FAN Control: 3 Fan speeds as Low , Medium , High
6 - No Need Convertor: 24 VAC, 110VAC, 220VAC compressors and fans, all can be connected and controlled to the HVAC relays
7 - VAV control, 0-10 VDC controlling with adjustable High, Medium, Low voltage Output
8 - AHU Control, 4-20 mA output
9 - Auto Mode: to auto select between Cool, Heat, Fan in all your year seasons
10 - Adjustable: Temp sensor calibration built in the LCD panel to fit your real room temp.
11 - Extra sensors: Second Temp sensor/ Humidity input 4-20/0-10 V
12 - Diffrent calculation used LCD temp sensor, HVAC ext temp sensor, or Average between both for big halls.
13 - More control: can be control as master slave thermostat for 1 compressor for many DLP LCD panels
14 - Powerfull: each DLP Thermostat can control up to 8 other LCD Thermostat.
15 - Integration: smart-HDL also can control split AC by IR control, 3rd Party HVAC BMS system by RS232.
Smart-HDL care about everyone in the world, to make your home healthy, saves your energy, educates you, and makes you happier.
For more info, Manuals, Films and others you can visit our website http://www.smart-hdl.com
For installation and Programming Film you can visit http://www.youtube.com/sbustraining
About the Author
Smart HDL webmaster
If you are looking for a different item here are a list of related products on Woodturning Tools, please check out the following:

Frequently Asked Questions...
What can cause HVAC compressor to sweat and discharge to be cool?
The high pressure line is cool leaving the compressor and the compressor is sweating. The unit is still cooling the home and is approx. 4yrs old.
The discharge is not running hot (or warm for that matter). The high pressure line leaving the condenser is cooler than ambient temp. Also the low pressure (suction line) is not sweating as much as the compressor. Could this be from being overcharged w/ freon and the relief protection is paying off to the suction (low pressure line)
The discharge is not running hot (or warm for that matter). The high pressure line leaving the condenser is cooler than ambient temp. Also the low pressure (suction line) is not sweating as much as the compressor. Could this be from being overcharged w/ freon and the relief protection is paying off to the suction (low pressure line) The discharge pressure is at 245 and suction is 70. It's a 3.5 ton unit
Answer:
Well the sweating is condensation kinda like a cold beer can on a hot summer day. The unit uses refrigerant that absorbs the heat in your house threw the evaporator coil and discharges it threw your outside condenser coil. Heat is attracted to cold so the low boiling point of refrigerant is squirted into your evap coil threw a cap tube and it boiling off makes it cold and attracts the heat. It is hot when it hits the condenser so the outside temp is cooler and releases the heat.




































































